Attaching to a Claas forage harvester
Continued on next page KM00321,0000881 -19-26FEB19-3/4
IMPORTANT: The following entries must be
released by Claas.
5. Use the old Orbis types when selecting the type of
machine.
NOTE: For example, in the case of an Orbis 900, select
type 992 and not type I53 (see illustration).
6. Select the following settings according to the model of
the rotary harvesting unit:
KM359967 —UN—22FEB19
Rotary harvesting unit
model
Machine type Transmission Transport system
345plus
Orbis 450
3 speed transmission No transport system
360plus/460plus without
chassis
Orbis 600
3 speed transmission No transport system
360plus/460plus with chassis Orbis 750
3 speed transmission
Cart
375plus/475plus without
chassis
Orbis 750
3 speed transmission No transport system
375plus/475plus with chassis Orbis 750
3 speed transmission
Cart
390plus/490plus without
chassis
Orbis 900
3 speed transmission No transport system
390plus/490plus with chassis Orbis 900
3 speed transmission
Cart
IMPORTANT: Additionally, select the setting
"variable drive" for each type.
20-3
031519
PN=30
To Next Page
Loading...
