Kemper 345plus - Page 5

Contents
Page
Every 50 Hours - Hydraulic Cylinder
Axle Pins (390
plus
Only)................................ 50-11
Every 50 Hours - Upper Rolls of
Oscillating Frame ......................................... 50-11
Every 3 Years—Change Coolant of
Main Drive Friction Clutch ............................50-12
At the Start of Every Harvesting Season ..........50-12
Daily Maintenance (Or More Often if
Necessary) ...................................................50-12
Weekly Service.................................................50-13
After Each Harvesting Season .........................50-13
Service
Metric Bolt and Screw Torque Values.................55-1
Relieve Pressure on the Main Drive
Slip Clutches ..................................................55-2
Removal of Slip Clutch .......................................55-3
Disassemble Slip Clutch.....................................55-5
Install New Rotating Blades................................55-6
Adjusting Dividers...............................................55-7
Checking Scraper Adjustment ............................55-8
Checking Cleaners .............................................55-8
Adjust the Cleaners on the Feeder
House Drums .................................................55-9
Check Steering Sensor Voltage
Readings (Rotary Harvesting Units
for CLAAS forage harvesters) ........................55-9
Cleaning Rotary Harvesting Unit ......................55-10
Storage
Storage at End of Harvesting Season ................60-1
Removing Harvesting Unit from Storage ............60-1
Specifications
Machine Design Life ...........................................65-1
345
plus
Rotary Harvesting Unit............................65-1
360
plus
Rotary Harvesting Unit............................65-1
375
plus
Rotary Harvesting Unit............................65-2
390
plus
Rotary Harvesting Unit............................65-2
Sound Level........................................................65-2
EC Declaration of Conformity .............................65-3
Serial Number
Rotary Harvesting Unit Serial Number Plate ......70-1
Serial Number.....................................................70-1
iii
031519
PN=3