X5 FastMig
Operating manual - EN
7. To save, scroll down to Save to and select it.
8. Select the memory channel slot for saving and confirm.
Once ready, you can continue to the Welding parameters view to adjust the welding settings for the new channel,
create a new channel or go back to the Channels view.
Tip: It is also possible to create new channels based on all of the unused welding programs available for the
selected operation mode by selecting Create allin the Channel view's actions menu. This option uses the
available memory channel slots.
© Kemppi
81 1920960 / 2039
To Next Page
Loading...
