Kemppi X8 - X8 MIG Gun 200-G

X8 MIG WELDER 2.8 Technical data
Feature Description Value
Standards
• IEC60950-1
• EN62368-1
• EN300328v2.1.1
• EN300330v2.1.1
• EN301489-1v2.1.1
• EN301489-3v2.1.0
• EN301489-17v3.1.1
2.8.6 X8 MIG Gun 200-g
Feature Description Value
Welding process MIG/MAG
Method of guidance Manual
Type of cooling Gas
Type of connection Kemppi
Wire diameters 0.8/0.9/1.0mm
@60% (MIXED
GAS)
200 A
@100% (MIXED
GAS)
@60% (CO
2
)
Load capacity
@100% (CO
2
)
Fe 0.8/0.9/1.0/1.2mm
Fe-MC/FC 0.9/1.0/1.2mm
Ss 0.8/0.9/1.0/1.2mm
Ss-MC/FC 0.9/1.0/1.2mm
Filler wires
Al 0.8/0.9/1.0/1.2mm
Operating temperature range -20…+40°C
Storage temperature range -40…+60°C
Minimum cooling power at 1.6l/min* -
Minimum flow rate
-
Pistol grip handle Yes
Changeable neck Yes
Rotating neck Yes
OPERATING MANUAL | EN 169
©
KEMPPI 2017 | 1817