X8 MIG WELDER 1.1 Disclaimer
1 Read first
Kemppi takes special care in informing its customers about the safety of our products. We also
mind the environment and aspire to disposing of our products according to specified European
Directives.
1.1 Disclaimer
While every effort has been made to ensure that the information contained in this guide is
accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves
the right to change the specification of the product described at any time without prior notice. Do
not copy, record, reproduce or transmit the contents of this guide without prior permission from
Kemppi.
1.2 Documentation symbols
Items in the manual that require particular attention, to minimize damage and personal harm, are
indicated with a three-level notification and warning system.
Convention Used for
Note:
Note text here.
Gives the user a piece of information of particular importance.
Caution:
Caution text here.
Describes a situation that may result in damage to the
equipment or system.
Warning:
Warning text here.
Describes a potentially dangerous situation that may result in
personal damage or fatal injury.
1.3 Kemppi symbols
Table 1: Kemppi symbols used in this documentation
Symbol Description
CE mark
OPERATING MANUAL | EN 4
©
KEMPPI 2017 | 1817
To Next Page
Loading...
Need help?
General
