Kemppi X8 - X8 MIG Gun 500-W

X8 MIG WELDER 2.8 Technical data
Figure 53: Neck dimensions and bending angle
2.8.10 X8 MIG Gun 500-w
Feature Description Value
Welding process MIG/MAG
Method of guidance Manual
Type of cooling Liquid
Coolant flow rate 1l/min
Coolant pressure (max) 5bar
Type of connection Kemppi
Wire diameters 0.8/0.9/1.0/1.2/1.6mm
@60% (MIXED
GAS)
@100% (MIXED
GAS)
500A
@60% (CO
2
)
Load capacity
@100% (CO
2
)
Fe 0.8/0.9/1.0/1.2/1.6mm
Fe-MC/FC 0.9/1.0/1.2/1.6mm
Ss 0.8/0.9/1.0/1.2/1.6mm
Ss-MC/FC 0.9/1.0/1.2/1.6mm
Filler wires
Al 0.8/0.9/1.0/1.2mm
Operating temperature range -20…+40°C
Storage temperature range -40…+60°C
Minimum cooling power at 1.6 l/min *
1.9 kW
Minimum flow rate 1.6 l/min
Pistol grip handle Yes
Changeable neck No
Rotating neck No
OPERATING MANUAL | EN 174
©
KEMPPI 2017 | 1817