X8 MIG WELDER 2.1 Disclaimer
2 X8 MIG Welder
These instructions describe the use of Kemppi's X8 MIG Welder, the top-class welding system
for demanding industrial use. The system consists of a power source, wire feeder, welding gun,
Control Pad and various welding software components and connectivity to Kemppi cloud services.
Read the instructions through carefully.
2.1 Disclaimer
While every effort has been made to ensure that the information contained in this guide is
accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves
the right to change the specification of the product described at any time without prior notice. Do
not copy, record, reproduce or transmit the contents of this guide without prior permission from
Kemppi.
2.2 System introduction
X8 MIG Welder is a multi-process welding equipment intended for demanding professional use in
general or heavy fabrication. The welding system is suitable for various MIG/MAG processes (MIG,
1-MIG, Pulse, DPulse, WiseRoot+, WiseThin+ ) as well as MMA welding and gouging, cladding
and brazing.
1. X8 Power Source 400/500/600
• Includes all the software, welding programs and memory channels for the welding system
OPERATING MANUAL | EN 8
©
KEMPPI 2017 | 1817
To Next Page
Loading...
Need help?
General
