X8 MIG WELDER 2.2 System introduction
• Connects to one or two X8 Wire Feeders
2. X8 Wire Feeder
• Operates with several wire spool types (some of which require an adapter)
• Connects to an external wire drum
• Contains a control panel for basic adjustment of welding parameters, memory channels
and settings
3. X8 MIG Gun 200/300/400-g, 400/500
• Connects to the wire feeder with Kemppi Gun Adapter
• Gas-cooled models feature a rotating, changeable neck
• Remote control for selecting memory channels and adjusting settings (optional)
• Ergonomic pistol grip handle
4. X8 Cooler (optional)
• Optionally included in the power source delivery
• Can also be purchased separately
• Essential for welding with a current over 400 A
5. Control Pad
• Wireless remote interface for operating X8 MIG Welder
6. Interconnection Cable 70/95-w/-g (several options)
• Bundle of cables connecting the wire feeder to the power source
• Transfers the welding current, control signals, shielding gas and coolant from the power
source to the wire feeder
7. X8 Wheel Set (several options)
• The wheel set is included in the power source delivery
• The gas cylinder cart is optionally included in the power source delivery
8. My Fleet web service
• Cloud-based service for viewing and managing various information about your X8 MIG
Welder
• Provides manufacturer's validation certificate
9. WeldEye (optional)
• Cloud-based service for creating and managing digital WPS documents and other welding-
related information
In addition:
• Several accessories (optional)
• Several welding software products (optional)
OPERATING MANUAL | EN 9
©
KEMPPI 2017 | 1817
To Next Page
Loading...
Need help?
General
