Kemppi X8 User Manual

X8 MIG WELDER 2.4 Installation
1 2
4.
Load the new liner through the welding gun connector until enough liner protrudes from the
neck. Adjust the length according to the contact tip adapter.
Note:
Make sure the liner is properly inside the contact tip adapter before you cut the liner
at the connector end.
OPERATING MANUAL | EN 83
©
KEMPPI 2017 | 1817

Kemppi X8 Specifications

General

Brand	Kemppi
Model	X8
Category	Welding System
Language	English