Kenwood NX-5200K3 Function Reference

2.2
Configuration Related to Transmission and Reception in
Emergency Mode
The transceiver can have a maximum of 8 configurations related to transmission and reception in Emergency Mode as the
Emergency Profile. By allocating Emergency Profile
to each zone or channel, the Emergency behavior of the transceiver
can vary depending on the zone or channel.
The functions that can be configured as an Emergency Profile are as follows:
0
Emergency Channel Type
0
Emergency Zone-Channel
0
Emergency Mode Type
0
Emergency Cycle
0
Duration of Locator Tone 1
0
Transmit Duration
0
Duration of Locator Tone 2
0
Receive Duration
0
Emergency LED
The common functions in Emergency Mode are as follows. One configuration from below is available for the transceiver:
0
Emergency Display
0
Emergency Microphone Sense
0
Emergency Text
0
Background Transmission
0
Emergency Channel Lock
0
Suspended Power-off
0
Surveillance Mode
0
Functions related to Lone Worker
0
Functions related to Activity Detection
Emergency Profile can be configured for each zone or channel. If “Common” is configured in Emergency Profile for a
channel, the transceiver executes the Emergency behavior by using Emergency Profile Number configured for the zone
of the channel.
Also, in a DMR Conventional system, Emergency ID (DMR Conventional) can be configured for each system. (Refer to ID
Sent When Emergency Mode is Activated.)
Configuration using KPG-D1/ D1N
0
Configuring the various functions of Emergency Profile (
Transceiver Settings > Emergency Information >
Emergency Profile)
0
Configuring Common Functions for Emergency Mode ( Transceiver Settings > Emergency Information)
2 COMMUNICATIONS IN AN EMERGENCY
2.2 Configuration Related to Transmission and Reception in Emergency Mode
DMR FUNC (K, F)/Ver 2.20 97
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English