Kenwood NX-5200K3 Function Reference

2.3
Zone-channel Functioning in Emergency Mode
The channel to be used when the transceiver enters Emergency Mode can be configured.
Emergency Channel Type
Emergency Channel Type is the type of a channel used when the transceiver is placed in Emergency Mode.
Table 2-2 Emergency Channel Type
Configuration Description
Selected
When the transceiver enters Emergency Mode, the transceiver resets the migration state of
channels,
such as Home Channel, and then the transceiver executes Emergency on the previously
selected channel.
Fixed
After entering Emergency Mode, the transceiver migrates to the Zone-channel configured in
Emergency Zone-Channel and then executes the Emergency behavior.
The transceiver behaves as below according to the configuration for Emergency Channel Type:
0
Selected
0
If a channel in a DMR Conventional system is selected:
The transceiver behaves according to the configurations of Emergency ID and Emergency DMR ID Type (DMR
Conventional).
Table 2-3 Emergency ID (DMR Conventional)
Configuration Description
None The transceiver transmits only using the Color Code.
DMR
If “Group ID” is configured for Emergency
DMR ID Type, the transceiver initiates a Group Call by
using the Group ID configured for Emergency DMR ID.
If “Unit ID” is configured for Emergency DMR ID Type, the transceiver initiates an Individual Call
by using the Unit ID configured for Emergency DMR ID.
0
Fixed
0
If a channel in a DMR Conventional system is configured for Emergency Zone-Channel:
The transceiver behaves according to the configurations of Emergency ID and Emergency DMR ID Type (DMR
Conventional).
Table 2-4 Emergency ID (DMR Conventional)
Configuration Description
None The transceiver transmits only using the Color Code.
DMR
If “Group ID” is configured for Emergency
DMR ID Type, the transceiver initiates a Group Call by
using the Group ID configured for Emergency DMR ID.
If “Unit ID” is configured for Emergency DMR ID Type, the transceiver initiates an Individual Call
by using the Unit ID configured for Emergency DMR ID.
Configuration using KPG-D1/ D1N
0
Configuring Emergency Channel Type ( Transceiver Settings > Emergency > Emergency Profile)
0
Configuring Emergency
ID (DMR Conventional) (
Transceiver Settings > Personal > Personal Features > DMR
Conventional > Emergency > Emergency ID (DMR Conventional))
2 COMMUNICATIONS IN AN EMERGENCY
2.3 Zone-channel Functioning in Emergency Mode
DMR FUNC (K, F)/Ver 2.20 98
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English