Kenwood NX-5200K3 Function Reference

1.4
Using DMR ID to Initiate a Selective Call
An individual call and group call are available by using DMR IDs. In addition, a message can be sent to a specified target
ID in various types of message communications.
Available Calls
The following various types of calls can be used in a DMR Conventional system. For transceiver operations and behaviors,
refer to the instructions of each call type.
0
Individual Call/ Paging Call
0
Individual Call (Individual Call Acknowledge Request)
0
Group Call
0
Broadcast Group Call
0
Status Call
0
Short Data Call
Transition for Each Mode
If a user wishes to send or receive an Individual Call, Group Call, Status Message, or Short Message, the user must operate
the transceiver after selecting the desired mode. The following are the transition diagrams for each mode.
Transmission
Individual Call Mode
Status Mode
Individual Call Mode
Status Mode
Short Message Mode
Short Message Mode
Short Message key
Individual +
Short Message key
Individual key Individual + Status key
Individual Call Mode
Status key
Group Call Mode
Status Mode
Group Call Mode
Short Message Mode
Group + Short Message keyGroup key
Group Call Mode
Normal Mode
Group + Status key
Normal Mode
Home ([ ]) key
Home ([ ]) key
Home ([ ]) key
Home ([ ]) key Home ([ ]) key
Home ([ ]) key
Home ([ ]) keyHome ([ ])
key
Home ([ ])
key
Home ([ ])
key
[ ] key
[ ] key
[ ] key
[ ] key
1 DMR CONVENTIONAL SYSTEM
1.4 Using DMR ID to Initiate a Selective Call
DMR FUNC (K, F)/Ver 2.20 15
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English