Emergency DMR ID Type
Emergency DMR ID Type is the type of DMR ID used for automatic transmission while the transceiver is in Emergency
Mode in a DMR Conventional system.
“Group ID” or “Unit ID” can be configured for Emergency DMR ID Type in each system.
Configuration using KPG-D1/ D1N
Configuring Emergency
DMR ID Type (
Transceiver Settings > Personal > Personal Features > DMR Conventional
> Emergency > Emergency ID (DMR Conventional))
Emergency DMR ID
Emergency DMR ID is the DMR ID used for transmission and reception while the transceiver is in Emergency Mode in a
DMR Conventional system.
If
“Unit ID” is configured for Emergency DMR ID Type, the Unit ID used for initiating an Individual Call in Emergency Mode
can be configured for each system.
If “Group ID” is configured for Emergency DMR ID Type, the Group ID used for initiating a Group Call in Emergency Mode
can be configured for each system.
Configuration using KPG-D1/ D1N
Configuring Emergency DMR ID (
Transceiver Settings> Personal> Personal Features> DMR Conventional>
Emergency> Emergency ID (DMR Conventional))
2.7
Other Functions in Emergency Mode
Emergency Channel Lock and Suspended Power-off
are other available functions in Emergency Mode.
Emergency Channel Lock
Emergency Channel Lock
is the function to disable changing a zone or channel while the transceiver is in Emergency
Mode.
If this function is enabled, a zone or channel cannot be changed while the transceiver is in Emergency Mode.
If this function is disabled, a zone or channel can be changed while the transceiver in Emergency Mode is not transmitting.
Configuration using KPG-D1/ D1N
Configuring Emergency
Channel Lock to be enabled or disabled (
Transceiver
Settings > Emergency > Emergency
Information)
2 COMMUNICATIONS IN AN EMERGENCY
2.6 ID Sent When Emergency Mode is Activated
DMR FUNC (K, F)/Ver 2.20 106
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
