1.12
Causing Transceivers Other than the Transceiver of the
Specified ID to Participate in a Conversation (Open Voice
Channel Mode)
Open Voice Channel Mode (OVCM)
is the function to hear a conversation even if the received ID does not match when
the transceiver receives various voice calls (Individual Call, Group Call, Broadcast Call).
When the use of OVCM is permitted for the transceiver receiving the various voice calls, the transceiver can hear the
conversations even if the received ID does not match.
This function is used for transceivers other than the transceiver of the Specified ID to participate in a conversation.
To use this function, Open Voice Channel Mode must be enabled by using KPG-D1/ D1N. Also, to send out a signal that
is applied with OVCM, press the OVCM key to enable Open Voice Channel Mode.
Or, calls by OVCM can be enabled if “OVCM” is selected from Menu Mode. (Refer to Common FUNC Using Menu Mode.)
The “
” icon blinks on the transceiver display when OVCM is enabled.
Table 1-16 Open Voice Channel Mode
Configuration Description
Enabled
Transmit Operation:
By pressing the OVCM key, or by selecting “OVCM” from Menu Mode, calls by OVCM can be
enabled
or disabled. The transceiver can transmit a signal with OVCM applied while calls by OVCM
are in the enabled status.
Receive Operation:
Conversations can be heard even if the ID does not match when the transceiver receives a call
with OVCM applied.
Disabled
Transmit Operation:
Calls by OVCM cannot be enabled nor disabled even if the OVCM
key is pressed or “OVCM” is
selected from Menu Mode. Therefore, the transceiver cannot transmit a signal with OVCM applied.
Receive Operation:
Conversations cannot be heard if the ID does not match even when the transceiver receives a call
with OVCM applied.
1 DMR CONVENTIONAL SYSTEM
1.12 Causing Transceivers Other than the Transceiver of the Specified ID to Participate in a Conversation (Open Voice Channel Mode)
DMR FUNC (K, F)/Ver 2.20 57
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
