Kenwood NX-5200K3 Function Reference

For example, Transceiver A specifies the ID of Transceiver B, and initiates a call with OVCM applied (refer to the figure
below).
A B (ID = 2)
C (ID = 3) D (ID = 4)
ID = 2
Figure 1-6 Operation Examples
Table 1-17 Configuration Examples
Transceivers Open Voice Channel Mode Call by OVCM
A Enabled Enabled
B Disabled Disabled
C Enabled Disabled
D Disabled Disabled
0
Because the ID matches, Transceiver B can communicate with Transceiver A even if Open Voice Channel Mode is
disabled.
0
Because Open
Voice Channel Mode is enabled, Transceiver C can communicate with Transceiver A even if the ID does
not match.
0
Because Open Voice Channel Mode is disabled and the ID does not match, Transceiver D cannot communicate with
Transceiver A.
Also, even if calls by OVCM are disabled, Transceiver B or C receiving a call with OVCM applied transmits a signal with
OVCM applied when replying.
Note
0
If the transceiver is turned off and turned back on while calls by OVCM are enabled, calls by OVCM are disabled.
0
OVCM does not function for the transmission of an Unaddressed Call or All Group Call.
0
OVCM does not function while the transceiver is in Emergency Mode.
0
Calls transmitted by OVCM are not stored in the stack memory of the transceiver.
0
Even
when the Unit ID is configured in the Individual ID List, the list number of the Individual ID List will be displayed on
the screen when an Individual Call that is applied with OVCM is received if the ID name is not configured. If the Unit ID
is not configured in the Individual ID List, the received Unit ID is displayed.
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF
keys on the transceiver (
Transceiver Settings > Key Assignment)
0
Configuring Open
Voice Channel Mode to be enabled or disabled (
Transceiver
Settings > Personal > Personal
Features > DMR Conventional > DMR)
1 DMR CONVENTIONAL SYSTEM
1.12 Causing Transceivers Other than the Transceiver of the Specified ID to Participate in a Conversation (Open Voice Channel Mode)
DMR FUNC (K, F)/Ver 2.20 58
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English