Kenwood NX-5200K3 Function Reference

1.19
Migrating Automatically to the Site Providing Better Radio
Environment (Site Roaming)
Site Roaming is the function that automatically switches the channel to a site (channel) that provides a better radio
environment when the transceiver is used under the DMR Conventional system.
The transceiver receives a synchronization signal transmitted from the repeaters in multiple sites at regular time intervals,
and detects the RSSI level. Therefore, the transceiver migrates automatically to the channel providing better radio
environment.
Up to a maximum of 16 sites can be configured for KENWOOD’s repeaters. It is therefore recommended that the Site
Roaming system be used by a maximum number of 16 channels.
Repeater 1
Repeater 2
Repeater 3
Subscriber Unit
IP Network
Synchronization Signals
(RSSI Level: Weak)
Synchronization Signals
(RSSI Level: Weak)
Synchronization Signals
(RSSI Level: Strong)
Figure 1-8 Image of Communications of Site Roaming
This function can be used by configuring the DMR Site Roaming channels for each system using KPG-D1/ D1N.
1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
DMR FUNC (K, F)/Ver 2.20 81
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English