Kenwood NX-5200K3 Function Reference

Note
0
To
receive a Remote Monitor request message and accept the received message, Remote Monitor needs to be enabled.
0
The transceiver initiates a continuous transmission only if the message requesting the Remote transmission is received
by an Individual Call. The transceiver does not initiate a continuous transmission even if the message requesting the
Remote transmission is received using anything other than Individual Call.
0
While the transceiver is in the status of continuous transmission by Remote Monitor, the Time-out Timer, Busy Channel
Lockout and In-call Busy Channel Lockout functions are disabled.
0
The received Color Code and the Color Code configured for the transceiver need to match to receive a Remote Monitor
request message.
Configuration using KPG-D1/ D1N
0
Configuring Remote Monitor to be enabled or disabled (
Transceiver Settings > Personal > Personal Features
> DMR Conventional > DMR > Remote Monitor)
0
Configuring Remote
Monitor Timer (
Transceiver Settings > Personal > Personal Features > DMR Conventional
> DMR > Remote Monitor)
0
Configuring Remote Monitor Display
(
Transceiver Settings > Personal > Personal Features > DMR
Conventional > DMR > Remote Monitor)
Checking Whether Another Transceiver Is in Operation (Radio Check)
Radio Check
can be used to check by using radio communication whether an individually specified transceiver is operated
in the system.
An individually specified transceiver can be controlled by sending a Radio Check message in Remote Control Mode and by
making the transceiver receive the message. (Refer to Sending a Remote Control Message in Remote Control Mode.)
Note
0
Whether
to accept a Radio Check message when the transceiver receives the Radio Check message can be configured
using KPG-D1/ D1N.
0
The received Color Code and the Color Code configured for the transceiver need to match to receive the Radio Check
message.
Configuration using KPG-D1/ D1N
Configuring Radio Check to
be enabled or disabled (
Transceiver
Settings > Personal > Personal Features > DMR
Conventional > DMR)
1 DMR CONVENTIONAL SYSTEM
1.18 Remote Operation by Radio Communication (Remote Control)
DMR FUNC (K, F)/Ver 2.20 80
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English