Kenwood NX-5200K3 Function Reference

Key operations for selecting a list or entering characters are described for each mode in this chapter. Refer to Common
FUNC “Operating the Transceiver in Each Mode (Common Operation)” for instruction.
Key
Individual Call Mode
Selecting a list
12 : 34
A
M
Individual 0002
TRUCK 824
TRUCK 825
TRUCK 826
BackPage
Manual entry
Individual
UID 1
12 : 34
A
M
Select Delete
Menu ([Q])
Press
Initiates a Paging Call after aborting the
current mode.
Initiates a Paging Call after aborting the
current mode (after finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is
flashing)
Back ([O])
Press
Returns to the menu (if the transceiver enters
this mode by pressing the Menu key).
Deletes one character.
Returns
to the menu if no character is entered
(if the transceiver enters this mode by
pressing the Menu key).
Hold
Down
-
Deletes all characters.
Function ([W])
Press
Migrates to the code entry mode (only if
Manual Dialing is enabled).
Migrates to the list selection mode.
Home ([T])
Press Aborts the current mode.
Side 1
*1
or [+]
*2
Press The configured function functions.
Side 2
*1
or [-]
*2
Press The configured function functions.
Side 3
*1
Press The configured function functions.
[G]/ [H]
Press
Selects Unit IDs registered in the Individual ID
List one at a time.
Selects Digit No. one at a time.
Hold
Down
Selects Unit IDs registered in the Individual ID
List continuously.
Selects Digit No. continuously.
[E] or [ ]
*2
Press -
[F] or [ ]
*2
Press Migrates to Status Mode or Short Message Mode.
Selector
*3
- The configured function functions after aborting the current mode.
Lever Switch
*1
- The configured function functions after aborting the current mode.
[0] to [9] Press Directly selects a Unit ID registered in the list. Enters the Digit No.
[*] Press
Initiates a Paging Call after aborting the
current mode.
Initiates a Paging Call after aborting the
current mode (after finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is
flashing)
[#]
Press
Returns to the menu (if the transceiver enters
this mode by pressing the Menu key).
Deletes one character.
Returns
to the menu if no character is entered
(if the transceiver enters this mode by
pressing the Menu key).
Hold
Down
-
Deletes all characters.
PTT Switch Press Transmits after aborting the current mode.
*1
Portable only
*2
KCH-20R (Featured Panel) only
*3
Portable and KCH-20R (Featured Panel) only
6 KEY OPERATIONS FOR EACH MODE
6
KEY OPERATIONS FOR EACH MODE
DMR FUNC (K, F)/Ver 2.20 160
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English