About This Manual
This manual describes the functions of the NX-5200/ NX-5300/ NX-5400/ NX-5700/ NX-5800/ NX-5900 transceiver operated
in the DMR system.
This document is created for the product having the following design specifications.
Item Specifications How to Verify
Market Code K, F
Printed or labeled on the packaging and the model name plate on the
transceiver.
Firmware Version of
the Transceiver
2.20.00
Can be viewed in the Transceiver Information dialog box of KPG-D1/ KPG-
D1N. Or, firmware version of the transceiver can be viewed by the following
ways:
Portable transceiver:
Turning
the transceiver on while pressing and holding the Side 3 key causes
the firmware version to appear on the display.
Mobile transceiver:
Turning the transceiver on while pressing and holding the [+] key causes the
firmware version to appear on the display.
Common to Portable and Mobile:
Turning the transceiver on while pressing and holding the Menu ([Q]) key
causes the transceiver to display Radio Mode Selection. Then, if “Transceiver
Info” is selected and the Menu ([Q]) key is pressed, the transceiver enters
Transceiver Information Mode, and then the firmware version can be viewed.
Version of KPG-D1/
KPG-D1N
V 2.20
Can be viewed in the About KPG-D1 dialog box or About KPG-D1N dialog
box of KPG-D1/ KPG-D1N.
K, F: Designed for the North American markets.
Also,
to use the functions of the DMR system described in this manual, the following Radio Feature Licenses are required:
Function Name Radio Feature License Name
DMR Conventional KWD-5300CV
Remote Control KWD-5007RC
About This Manual
DMR FUNC (K, F)/Ver 2.20 v
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
