4 SCAN 134
4.1 Starting the Scan 134
4.2 Scanning in One Zone (Single Scan) 135
Conditions to Activate the Scan (Single
Scan) 136
Conditions to Resume the Scan (Single
Scan) 136
Transceiver Behavior in the Case that the
Scan
Cannot Be Resumed (Single Scan) 136
4.3 Scan by Registering Multiple Target
Channels for Scan in the List (List Scan) 137
Conditions to Activate the Scan (List
Scan) 138
Conditions to Resume the Scan (List
Scan) 138
Transceiver Behavior in the Case that the
Scan Cannot Be Resumed (List Scan) 139
Scan List 139
Changing the Scan List (Scan Program) 140
4.4 Scanning All Target Zones for Scanning
(Multi-Zone Scan) 142
Conditions to Activate the Scan (Multi-
Zone Scan) 143
Conditions to Resume the Scan (Multi-
Zone Scan) 143
Transceiver Behavior in the Case that the
Scan Cannot Be Resumed (Multi-Zone
Scan)
143
4.5 Scanning the Specific Channel
Preferentially (Priority Scan) 144
Changing the Priority Channel 146
Lookback 148
Priority 1 Temporary Delete/Add, Priority
2 Temporary Delete/Add 149
Scan Normal Channel 149
4.6 Transceiver Behavior during the Scan 150
Transceiver Behavior When a Zone-
channel Is Changed during the Scan 150
Reception during the Scan 150
4.7 Scan Function 151
Adding or Deleting a Channel to/from the
Target Channels for Scan (Scan Delete/Add)
151
Adding or Deleting a Zone to or from the
Target Zones for Scanning (Zone Delete/Add)
152
Revert Channel 153
Dropout Delay Time 154
Dwell Time 154
Channel Recall 154
Priority-channel Stop Tone 155
Auto Scan 155
Selected Channel Scan 156
Power-on Scan 156
Starting Scanning by Linking with the
Microphone (Off-hook Scan) 157
Scan Stop Tone 157
Preamble Length 157
5 DATA COMMUNICATION
FUNCTIONS 158
5.1 Prioritizing Data Communications Using an
External Device (Data Override) 158
5.2 Restricting the Warning Display during
Data Communications (Silent Report) 159
6 KEY OPERATIONS FOR EACH
MODE 160
7 BEEP LIST 166
　
CONTENTS
DMR FUNC (K, F)/Ver 2.20 iv
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
