Kenwood NX-5200K3 Function Reference

Changing the Scan List (Scan Program)
A desired Zone-channel can be registered as a member for List Scan in the Scan List by operating the transceiver. Also, a
registered member in the Scan List can be deleted from the list.
The Scan List can be edited in Scan Program Mode.
Pressing the Scan Program key places the transceiver in Scan Program Mode.
Or,
pressing the Menu key to enter Menu Mode and then selecting “Scan Program ” places the transceiver in Scan Program
Mode. (Refer to Common FUNC Using Menu Mode.)
Operating the transceiver
0
Adding a member for List Scan
1
Select the channel for which the Scan List to be edited is configured and then press the Scan Program key.
A Key Beep A (1 beep) sounds from the transceiver.
The
transceiver enters Scan Program Mode and the edit screen of the Scan
List appears.
The following operations are identical even if the transceiver enters Scan
Program Mode by pressing the Menu key.
Note
If the selected channel is registered in the Scan List, the “a” icon
appears on the left of the channel name.
2
Select a Zone-channel to add to the Scan List.
Select a channel by pressing the [G] or [H] key.
Select a zone by pressing the [E] or [F] key.
Refer to Common FUNC “Selecting or Clearing Data from a List” for
selection methods.
3
Press the Menu ([ ]) or [ ] key.
A Key Beep A (1 beep) sounds from the transceiver, and then the Zone-
channel
selected in Step 2 is added to a Scan List. The “a” icon appears
on the left of the channel name.
Note
In the following cases, a member cannot be added to a Scan List:
0
If the zone channel to be added to a Scan List is already configured as
a member in the Scan List
0
If a channel which is inappropriate for the configuration in Scan Type
(Scan
List), such as a channel in an NXDN Trunking system, is selected
for the Scan List with “Conventional” configured in Scan Type (Scan
List)
Scan List 1
12 : 34
A
M
Zone 1
Channel 1
Channel 2
D/A CH Back
Scan List 1
12 : 34
A
M
Zone 1
Channel 1
Channel 2
D/A CH Back
Scan List 1
12 : 34
A
M
Zone 1
Channel 1
Channel 2
D/A CH Back
4 SCAN
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
DMR FUNC (K, F)/Ver 2.20 140
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English