Priority 1 Temporary Delete/Add, Priority 2 Temporary Delete/Add
A Priority Channel is always scanned regardless of the Scan Delete/Add configuration. If this function is enabled, pressing
the Scan Delete/Add key temporarily deletes a Priority Channel from the target channels for scan when the scan pauses
on the Priority Channel during the scan.
Configuration using KPG-D1/ D1N
0
Configuration Priority
1 Temporary Delete/Add (Single Scan) to be enabled or disabled (
Transceiver Settings
> Zone/Channel > Zone Edit > Single Scan > Priority 1)
0
Configuration Priority
2 Temporary Delete/Add (Single Scan) to be enabled or disabled (
Transceiver Settings
> Zone/Channel > Zone Edit > Single Scan > Priority 2)
0
Configuring Priority 1 Temporary Delete/Add
(List Scan) to be enabled or disabled (
Transceiver Settings >
Scan > Scan List > Options > Priority 1)
0
Configuring Priority 2 Temporary Delete/Add (List Scan) to be enabled or disabled ( Transceiver Settings >
Scan > Scan List > Options > Priority 2)
Scan Normal Channel
Scan Normal Channel is the function to execute the scan by disabling the Priority Channel configuration even if a Priority
Channel is configured.
Even if the Priority Channel is configured, pressing the Scan Normal
key disables the configuration and mandatorily
executes Scan Normal Channel.
Configuration using KPG-D1/ D1N
Assigning functions to the PF
keys on the transceiver (
Transceiver Settings > Key Assignment)
4 SCAN
4.5 Scanning the Specific Channel Preferentially (Priority Scan)
DMR FUNC (K, F)/Ver 2.20 149
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
