Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver ( Transceiver Settings > Key Assignment)
0
Configuring Scan List ( Transceiver Settings > Scan > Scan List)
0
Configuring Scan List Number (Zone) ( Transceiver Settings > Zone/Channel > Zone/Channel Information >
Conventional)
0
Configuring Scan List Number (Channel) ( Transceiver Settings > Zone/Channel > Channel Edit > DMR
Conventional > General)
0
Configuring Scan Type ( Transceiver Settings > Zone/Channel > Zone Edit > Scan)
0
Configuring “Scan” Displayed to be enabled or disabled ( Transceiver Settings > Scan > Scan Information >
General)
Conditions to Activate the Scan (List Scan)
For the transceiver to start the List Scan, 2 or more Zone-channels must be registered as members in a Scan List.
Note
0
A Priority Channel is always registered as a member in a Scan List. However, if “Selected” is configured for the type of
the
Priority Channel (Type), the selected channel becomes the Priority Channel and target channel for scan, regardless
of the configuration in Selected Channel Scan or whether the selected channel is registered as a member in a Scan
List. (Refer to Priority Channel Type (Type).)
0
If Selected Channel Scan is enabled, the scan can be initiated even if only a single Zone-channel is configured as a
member in a Scan List because the selected channel also becomes the target channel for scan.
Conditions to Resume the Scan (List Scan)
For the transceiver to resume the List Scan, 2 or more Zone-channels to be scanned must be registered as members in a
Scan List.
If the transceiver does not satisfy the conditions to resume the scan, the scan remains paused.
Note
0
If
a channel is temporarily excluded from the target channels for scanning by the Priority Temporary Delete/Add function,
the channel is not scanned even if the channel is registered as a member in Scan List.
0
If Selected Channel Scan is enabled, the scan can be resumed even if only a single Zone-channel is configured as a
member in a Scan List because the selected channel also becomes the target channel for scan.
4 SCAN
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
DMR FUNC (K, F)/Ver 2.20 138
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
