Note
0
This function is enabled if “Audible” is configured for Emergency Mode Type.
0
For a portable transceiver that is connected to a Bluetooth or external speaker, Emergency Locator Tone (2 beeps) is
emitted from the speaker of the transceiver regardless of the configuration of Bluetooth Speaker and External
Speaker.
Also, the audio received will be output according to the configuration of the Bluetooth Speaker and External
Speaker.
0
For Mobile, where an Emergency Locator Tone (2 beeps) and received audio are emitted from depends on the
configuration in External Speaker.
0
Refer to Common FUNC “Switching the Speaker to Emit Audio (Bluetooth Speaker)” for the speaker to emit the Locator
Tone (2 beeps) if a speaker supporting Bluetooth is connected.
Configuration using KPG-D1/ D1N
Configuring Duration of Locator Tone 1 (
Transceiver Settings > Emergency Information > Emergency Profile)
Duration of Locator Tone 2
Duration of Locator Tone 2 is the duration to emit an Alert Tone which notifies that the transceiver has completed an
automatic transmission in Emergency Mode, and starts receiving.
The transceiver automatically repeat transmitting and receiving in Emergency Mode. When the transceiver switches from
reception to transmission, an Emergency Locator Tone (2 beeps) sounds from the transceiver for the length of time
configured for Duration of Locator Tone 2.
When
the tone sounds, a user can easily recognize without viewing the transceiver that the transceiver ends to automatically
transmit in Emergency Mode. This tone can also be used to locate a user who is in emergency situations.
Note
0
This function is enabled if “Audible” is configured for Emergency Mode Type.
0
For a portable transceiver that is connected to a Bluetooth or external speaker, Emergency Locator Tone (2 beeps) is
emitted from the speaker of the transceiver regardless of the configuration of Bluetooth Speaker and External
Speaker.
Also, the audio received will be output according to the configuration of the Bluetooth Speaker and External
Speaker.
0
For Mobile, where an Emergency Locator Tone (2 beeps) and received audio are emitted from depends on the
configuration in External Speaker.
0
Refer to Common FUNC “Switching the Speaker to Emit Audio (Bluetooth Speaker)” for the speaker to emit the Locator
Tone (2 beeps) if a speaker supporting Bluetooth is connected.
Configuration using KPG-D1/ D1N
Configuring Duration of Locator Tone 2 (
Transceiver Settings > Emergency Information > Emergency Profile)
2 COMMUNICATIONS IN AN EMERGENCY
2.4 Automatically Transmitting and Receiving in Emergency Mode
DMR FUNC (K, F)/Ver 2.20 100
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
