Kenwood NX-5200K3 Function Reference

Individual ID List
If making Individual Calls, the desired Unit IDs need to be preconfigured in the transceiver using KPG-D1/ D1N prior to use
of the transceiver. A maximum of 1500 Unit IDs can be configured for Individual ID List.
Table 1-8 Individual ID List
Configuration Description
ID
A Unit ID can be configured in the range between 000001 and FFFCDF (hexadecimal), or between
1 and 16776415 (decimal).
ID Name
The caller’s ID Name is configured. A maximum of 14 characters can be configured for the ID
Name.
If the ID Name of the transmitting transceiver is configured in the Individual ID List, the ID Name
of the transmitting transceiver appears when the transceiver receives a call.
ID Mode
The permission or inhibition of transmission of the receiving party can be configured.
An ID for which “Receive Only” is configured for ID Mode does not appear on the ID selection
display in Individual Call Mode, and a user cannot select the ID in Individual Call Mode.
If the transceiver receives a call from an ID for which “Receive Only” is configured for ID Mode,
the
caller’s ID Name appears. In this case, a user cannot initiate a call to the party even if the user
attempts to respond by pressing the PTT switch.
Alert Tone
Individual:
The
type of tone sounding from the transceiver can be configured for an Individual Call from the
Unit IDs configured in the Individual ID List.
Paging:
The type of tone sounding from the transceiver can be configured for a Paging Call from the
Unit IDs configured in the Individual ID List.
Alert LED Color
Individual:
The
color of flashing LED can be configured for an Individual Call from the Unit IDs configured
in the Individual ID List.
Paging:
The color of flashing LED can be configured for a Paging Call from the Unit IDs configured in
the Individual ID List.
Note
To use Alert LED Color, Selective Call Alert LED needs to be enabled.
Configuration using KPG-D1/ D1N
Configuring Individual ID List
(
Transceiver Settings > DMR > Individual ID List)
1 DMR CONVENTIONAL SYSTEM
1.5 Making an Individual Call
DMR FUNC (K, F)/Ver 2.20 22
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English