To Next Page

To Previous Page

About the Notation of the Supported Models

This manual describes the supported models according to the following rules:

Model Notation

NX-5200

Portable

VHF

NX-5300 UHF

NX-5400 700 MHz/ 800 MHz

NX-5700

Mobile

VHF

NX-5800 UHF

NX-5900 700 MHz/ 800 MHz

About Examples of the Transceiver Display

This manual describes mainly by using the display examples of Portable display if the functions are common to the

transceivers.

The display examples of Mobile display are also described as needed. Also, the display examples of KCH-19

(Basic Panel) display are mainly used as the display examples for Mobile. The display examples of KCH-20R (Featured

Panel) are also used as needed.

About Notations

DMR FUNC (K, F)/Ver 2.20 vii

CONTENTS INDEX

CONTENTS2
About This Manual6
How to Read the In-depth Manual7
About Notations7
Abbreviations Used in This Document9
About Copyright10
About Trademarks and Patent Rights10
About the Programming Software11
About Options to Use the Functions Described in This Document12
About the Built-in GPS Receiver Unit13
How to Search for Information13
Revision History15
CONTENTS BY PURPOSE17
DMR CONVENTIONAL SYSTEM18
- Initiating Voice Communications (Basic Transmission and Reception)19
- Using the Signaling29
- Waiting for Both Digital Signals and Analog Signals (Mixed Mode)30
- Using DMR ID to Initiate a Selective Call32
- Making an Individual Call34
- Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call Acknowledge Request)42
- Making a Group Call47
- Making an Informative Group Call (Broadcast Group Call)53
- Common Functions for Data Communications55
- Sending and Receiving a Status Message (Status Call)56
- Sending and Receiving a Short Message (Short Data Call)67
- Causing Transceivers Other than the Transceiver of the Specified ID to Participate in a Conversation (Open Voice Channel Mode)74
- Calling All Transceivers Having the Same Color Code (Unaddressed Call)76
- Terminating Voice Communications by a Transceiver Other Than the Transmitting Transceiver (Call Interruption)77
- Sending GPS Data82
- GPS Functions86
- Receiving GPS Data90
- Remote Operation by Radio Communication (Remote Control)91
- Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)98
COMMUNICATIONS IN AN EMERGENCY110
- Placing the Transceiver in Emergency Mode110
- Configuration Related to Transmission and Reception in Emergency Mode114
- Zone-channel Functioning in Emergency Mode115
- Automatically Transmitting and Receiving in Emergency Mode116
- Indication and Sound in Emergency Mode119
- ID Sent When Emergency Mode is Activated122
- Other Functions in Emergency Mode123
- Placing the Transceiver in Emergency Mode Using the Lone Worker Function125
- Placing the Transceiver in Emergency Mode by Using the Activity Detection Function129
- Transceiver Behavior When the Transceiver Receives an Emergency Status132
COMMUNICATION SECURITY133
- Toggling the Encryption during Transmission between Enabled and Disabled135
- Configuring the Encryption Key Data Used for Communications136
- Transceiver Behavior upon Receipt of Encrypted Communication Data138
- Secure Cryptographic Module (SCM) (for AES/ DES Only)140
- Built-in DES142
- Enhanced Encryption143
- Protection Function of Encryption Key (Key Retention)143
- Deleting the Encryption Key (Key Delete)145
- Deleting All Encryption Keys (Zeroize)146
- Multi-key List149
- Transmit Clear Alert Tone150
- Scrambler/Encryption Status Memory150
SCAN151
- Starting the Scan151
- Scanning in One Zone (Single Scan)152
- Scan by Registering Multiple Target Channels for Scan in the List (List Scan)154
- Scanning All Target Zones for Scanning (Multi-Zone Scan)159
- Scanning the Specific Channel Preferentially (Priority Scan)161
- Transceiver Behavior during the Scan167
- Scan Function168
DATA COMMUNICATION FUNCTIONS175
- Prioritizing Data Communications Using an External Device (Data Override)175
- Restricting the Warning Display during Data Communications (Silent Report)176
KEY OPERATIONS FOR EACH MODE177
BEEP LIST183
INDEX186

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English

Kenwood NX-5200K3 Function Reference

Table of Contents

Other manuals for Kenwood NX-5200K3

Questions and Answers:

Kenwood NX-5200K3 Specifications

Related product manuals