KERN MRS120-3 User Manual

117 MRS-BA-defsi-0410
4.6.3 The change key
• Changing units
– If drying has already been performed or is under way, the unit of
measurement displayed can be changed using the change key
«
». Once a drying procedure is ended, the drying result can
be displayed in all the available units until the start of a new
drying sequence using the change key «
».
–
Release «
» once the unit to which you wish to change is
displayed
.
4.6.4 The start/stop key
•
Starting drying manually
– Ensure that there is no drying taking place, i.e. that the
instrument is in weighing mode.
– Press «
START/STOP
» briefly.
– The measurement is started.
• Stopping drying manually
– Drying is under way.
– Press «START/STOP» briefly.
–
The measurement is stopped.

KERN MRS120-3 Specifications

General

Brand	KERN
Model	MRS120-3
Category	Measuring Instruments
Language	English