MRS-BA-defsi-0410 82
3 Set up
3.1 Unpacking
The MRS 120-3 moisture analyzer comes in environmentally-
friendly packaging, specifically developed for this precision
instrument, which provides optimum protection for the instrument
during transportation.
NOTE
Retain the original packaging in order to avoid the MRS 120-3
moisture analyzer becoming damaged in transit when it is shipped or
transported and to store the MRS 120-3 under optimum conditions if
it is out of operation for an extended period.
Follow instructions carefully when you unpack the MRS 120-3
moisture analyzer in order to avoid damaging it:
•
Unpack the instrument carefully and gently. This is a precision
instrument.
• When temperatures outside are very low, the balance should
first be stored for a few hours in the unopened transport
package in a dry room at normal room temperature, so that no
condensation settles on the balance when it is unpacked.
• Check the moisture analyzer for any external visible signs of
damage immediately after you unpack it. If you find that it has
been damaged in transit, notify your KERN service agent
immediately.
• If the MRS 120-3 moisture analyzer is not being put into
operation immediately after purchase, store it in a dry place
with minimal fluctuations in temperature (Cap.3.2.2 “
Storage”)
•
Read these Operating Instructions carefully before operating the
balance, even if you have used KERN equipment before and pay
particular attention to the safety instructions (Cap.2 “Safety”).
To Next Page
Loading...
Need help?
General
