KERN PCB Series

PCB-BA-e-0712
2
7.4 PRE-Tare function _______________________________________________ 16
7.5 Plus/minus weighings ____________________________________________ 16
7.6 Parts counting __________________________________________________ 17
7.7 Net-total weighings ______________________________________________ 18
7.8 Percent weighings _______________________________________________ 18
7.9 Weighing units (Unit) _____________________________________________ 19
7.10 Display background illumination ___________________________________ 21
7.11 Animal weighing function _________________________________________ 22
8 Settings ______________________________________________________ 23
8.1 Call-up menu structure ___________________________________________ 23
8.2 Leave menu structure ____________________________________________ 24
8.3 Dosing and Zero-tracking _________________________________________ 24
8.4 Selection of the adjustment weight _________________________________ 25
8.5 Interface RS232C ________________________________________________ 26
8.5.1 Data transfer mode____________________________________________________ 26
8.5.2 Baud rate ___________________________________________________________ 26
8.6 Selection printed edition __________________________________________ 27
8.7 Reset to factory setting ___________________________________________ 28
9 Data output RS 232 C ___________________________________________ 29
9.1 Technical data___________________________________________________ 29
9.2 Pin allocation of the balance output socket (front view) ________________ 29
9.3 Explanation of the data transfer ____________________________________ 29
9.3.1 Pr PC ______________________________________________________________ 29
9.3.2 AU Pr______________________________________________________________ 29
9.3.3 AU PC _____________________________________________________________ 30
9.3.4 rE Cr ______________________________________________________________ 30
9.4 Output on bar code printer ________________________________________ 31
10 Service, maintenance, disposal_________________________________ 32
10.1 Cleaning _______________________________________________________ 32
10.2 Service, maintenance_____________________________________________ 32
10.3 Disposal________________________________________________________ 32
11 Instant help _________________________________________________ 33