Name: KERN PCB Series
Brand: KERN
Rating: 5 (1 reviews)

To Next Page

To Previous Page

PCB-BA-e-0712

8.7 Reset to factory setting

With this function the manual changes of the menu settings are reset to factory

setting.

For this switch on the balance using the key and wait for the „0“ display.

Press the key and keep it pressed until „UNIT“ appears on the display.

Press the

key nine times, in the display appears „rst“.

Acknowledge selection with

key. The current status „no“ is displayed.

Use the key to set the status to „YES“.

When pressing the

key, a reset to factory setting is carried out, and at the same

time the status is reset to „no“.

After that return to the weighing mode.

Questions and Answers:

Need help?

Do you have a question about the KERN PCB Series and is the answer not in the manual?

KERN PCB Series Specifications

General