KERN PCB Series User Manual

PCB-BA-e-0712
3
1 Technical data
KERN PCB 40-3 PCB 60-3 PCB 100-3 PCB 160-3
Readability (d) 0,001 g 0,001 g 0,001 g 0,001 g
Weighing range (max) 40 g 60 g 100 g 160 g
Taring range (subtractive) 40 g 60 g 100 g 160 g
Reproducibility 0,001 g 0,001 g 0,001 g 0,001 g
Linearity ±0,003 g ±0,003 g ±0,003 g ±0,003 g
Minimum unit weight at
piece counting
0,002 g 0,002 g 0,002 g 0,002 g
Warm-up time 2 hours 2 hours 2 hours 2 hours
Reference quantities at
piece counting
5, 10, 25, 50
Weighing Units
Details „Weighing units“ chapter 7.9
Recommended adjustment
weight, not added (class)
40g (F1) 50g (F2) 100 g (F1) 150 g (F1)
Stabilization time (typical) 3 sec.
Operating temperature + 5° C .... + 35° C
Humidity of air max. 80 % (not condensing)
Housing (B x D x H) mm
163 x 245 x 79 (excluding draft shield)
163 x 245 x 123 (including draft shield)
Housing (B x D x H) mm Ø 81
Weight kg (net) 1,1
Underfloor weighing
✓
Flush-mounted hook
✓

KERN PCB Series Specifications

General

Protection Class	IP54 (optional)
Readability	0.001 g - 0.1 g
Calibration	External calibration
Display	LCD
Weighing Units	g, kg, lb, oz
Tare Range	Full capacity
Plate size	Varies by model
Overall dimensions	Varies by model
Net weight	Varies by model
Platform Size	Varies by model
Material	Stainless steel
Interface	RS-232 (optional)
Reproducibility	0.001 g - 0.1 g (depending on the model)