PCB-BA-e-0712
12
6.2.2 Scope of delivery
Serial accessories:
• Balance (incl. protective cover)
• Weighing plate
• Mains power supply
• Operating Manual
• Windshield (PCB 40-3, PCB 60-3, PCB 100-3, PCB 160-3)
6.3 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
6.4 Operation using a (rechargeable) battery (optional)
Lift-off the battery cover on the lower side of the balance. Connect 9 V compound
battery.
Reinsert the battery cover.
For battery operation the balance has an automatic switch-off function which can be
activated or deactivated in the menu (chapter 8.1). Proceed as follows:
Switch-on the balance using the key and wait for the „0“ display.
Press the
key and keep it pressed until „UNIT“ appears on the display.
Press the key four times, in the display appears „AF“.
Confirm by pressing the key.
Use the
key to choose between the two following settings:
1) „AF on“: To save the battery, the balance switches off automatically
3 minutes after having finished the weighing procedure.
2) „AF off“: Switch-off function deactivated.
Use the key to confirm your selected setting.
If there exists an optional rechargeable battery, it has to be connected in the battery
compartment via a separate plug-in socket. Now the mains adapter delivered with the
rechargeable battery must be applied.
To Next Page
Loading...
Need help?
General
