KERN PCB Series User Manual

PCB-BA-e-0712
17
7.6 Parts counting
Switch-on the balance using the key and wait for the „0“ display.
Press key shortly.
The reference unit number 5 appears
By pressing the key several times other reference quantities 10, 25 and 50 can
be called up.
Place as many parts to count on the weighing plate as the set reference quantity
requires.
Confirm with key.
The balance is now in parts counting mode counting all units on the weighing plate.
By pressing the key the balance returns to the weighing mode and displays the
weight of the counted units.
Important: The larger the reference quantity, the more accurate the parts
counting.
Smallest counted weight see table „Technical data“, if this weight is less, in the
display appears „Er 1“. Use key to return to the weighing mode.
The tare vessels can also be used for piece counting. Before starting percent
weighing use the
key to tare out the container.

KERN PCB Series Specifications

General

Protection Class	IP54 (optional)
Readability	0.001 g - 0.1 g
Calibration	External calibration
Display	LCD
Weighing Units	g, kg, lb, oz
Tare Range	Full capacity
Plate size	Varies by model
Overall dimensions	Varies by model
Net weight	Varies by model
Platform Size	Varies by model
Material	Stainless steel
Interface	RS-232 (optional)
Reproducibility	0.001 g - 0.1 g (depending on the model)