Keysight 33210A 10 MHz Function/Arbitrary Waveform Generator
Service Guide
17
2 Quick Start
Introduction 18
To Prepare the Function Generator for Use 19
To Adjust the Carrying Handle 20
To Set the Output Frequency 21
To Set the Output Amplitude 22
To Set a DC Offset Voltage 24
To Set the High-Level and Low-Level Values 25
To Select “DC Volts” 26
To Set the Duty Cycle of a Square Wave 27
To Configure a Pulse Waveform 28
To View a Waveform Graph 29
To Output a Stored Arbitrary Waveform 30
To Use the Built-In Help System 31
To Rack Mount the Function Generator 33
To Next Page
Loading...
