2 Quick Start
18 Keysight 33210A Service Guide
Introduction
One of the first things to do with your function generator is
to become acquainted
with the front panel. We have written the exercises
in this chapter to prepare the
instrument for use and help you get familiar with some of its front-panel
operations. This chapter is divided into the following sections:
– To Prepare the Function Generator for Use on page 19
– To Adjust the Carrying Handle on page 20
– To Set the Output Frequency on page 21
– To Set the Output Amplitude on page 22
– To Set a DC Offset Voltage on page 24
– To Set the High-Level and Low-Level Values on page 25
– To Select “DC Volts” on page 26
– To Set the Duty Cycle of a Square Wave on page 27
– To Configure a Pulse Waveform on page 28
– To View a Waveform Graph on page 29
– To Output a Stored Arbitrary Waveform on page 30
– To Use the Built-In Help System on page 31
– To Rack Mount the Function Generator on page 33
To Next Page
Loading...
