Keysight Technologies 33210A - Setting Output Parameters

2 Quick Start
26 Keysight 33210A Service Guide
To Select “DC Volts”
You can select the “DC Volts” feature from the “Utility” menu, and then set a
constant dc voltage as an “Offset” value. Let's set “DC Volts” = 1.0 Vdc.
1 Press and then select the DC On softkey.
The Offset value becomes selected.
2 Enter the desired voltage level as an “Offset”.
Enter 1.0 Vdc with the numeric keypad or knob.
You can enter any dc voltage from -5 Vdc to +5 Vdc.