4- 60 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
Table 4-11 FMT format parameter
12 digits data will be sn.nnnnnEsnn, snn.nnnnEsnn, or snnn.nnnEsnn.
13 digits data will be sn.nnnnnnEsnn, snn.nnnnnEsnn, or
snnn.nnnnEsnn.
where, s is + or -, E is exponent symbol, and n means one digit number.
NOTE For binary data output format, the time stamp function is not available. Refer to
“Data Output Format” on page 1-22.
format Data format Ter minator
1
a
a. Compatible with the Keysight 4142B data output format.
ASCII (12 digits data with header) <CR/LF^EOI>
2
a
ASCII (12 digits data without header) <CR/LF^EOI>
3
a
binary <CR/LF^EOI>
4
a
binary <^EOI>
5
a
ASCII (12 digits data with header) ,
11 ASCII (13 digits data with header) <CR/LF^EOI>
12
ASCII (13 digits data without header)
b
<CR/LF^EOI>
15 ASCII (13 digits data with header) ,
21
ASCII (13 digits data with header)
b
b. Compatible with the Keysight 4155/4156 FLEX mode ASCII data.
<CR/LF^EOI>
22
ASCII (13 digits data without header)
b
<CR/LF^EOI>
25
ASCII (13 digits data with header)
b
,
To Next Page
Loading...
