Keysight E5260/E5270 Programming Guide, Edition 4 1- 37
Programming Basics
GPIB Interface Capability
GPIB Interface Capability
The following table lists the GPIB capabilities and functions of the Keysight
E5260/E5270. These functions provide the means for an instrument to receive,
process, and transmit, commands, data, and status over the GPIB bus.
The E5260/E5270 responds to the following HP BASIC statements:
•ABORT (IFC)
• CLEAR (DCL or SDC. same as AB command)
• LOCAL (GTL)
• LOCAL LOCKOUT (LL0)
•REMOTE
• SPOLL (Serial Poll)
• TRIGGER (GET. same as XE command)
Interface Function Code Description
Source Handshake SH1 Complete capability
Acceptor Handshake AH1 Complete capability
Talker T6 Basic Talker: YES
Serial Poll: YES
Talk Only Mode: NO
Unaddress if MLA (my listen address): YES
Listener L4 Basic Listener: YES
Unaddress if MTA (my talk address): YES
Listen Only Mode: NO
Service Request SR1 Complete capability
Remote/Local RL1 Complete capability (with local lockout)
Parallel Poll PP0 No capability
Device Clear DC1 Complete capability
Device Trigger DT1 Complete capability
Controller Function C0 No capability
Driver Electronics E1 Open Collector
To Next Page
Loading...
Need help?
General
