4- 146 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
Tdelay : Step source trigger delay time (in seconds) that is the wait time after
completing a step output setup and before sending a step output setup
completion trigger. Numeric expression.
0 to delay, with 0.1 ms resolution.
If this parameter is not specified, Tdelay is set to 0.
Mdelay : Step measurement trigger delay time (in seconds) that is the wait time
after receiving a start step measurement trigger and before starting a
step measurement. Numeric expression.
0 to 65.535, with 0.1 ms resolution.
If this parameter is not specified, Mdelay is set to 0.
Example
Statements
OUTPUT @E5270;"WT 5,0.1,0.1,0.1,0.1"
OUTPUT @E5270;"WT 5,0.2"
To Next Page
Loading...
Need help?
General
