In This Manual
This manual provides the information to control the Keysight E5260A/E5262A/
E5263A/E5270B via GPIB interface using an external computer, and consists of the
following chapters:
1. “Programming Basics”
This chapter provides basic information to control the Keysight E5260/E5270.
2. “Remote Mode Functions”
This chapter explains the functions of the Keysight E5260/E5270 in the remote mode.
3. “Programming Examples”
This chapter lists the GPIB commands and explains the programming examples for
each measurement mode or function. The examples have been written in the
Microsoft Visual Basic .NET or the HP BASIC language.
4. “Command Reference”
This chapter provides the complete reference of the GPIB commands of the Keysight
E5260/E5270.
5. “Error Messages”
This chapter lists the error codes, and explains them.
To Next Page
Loading...
Need help?
General
