Post Repair Tests
A1 Front Panel
A2 Power Supply
A3 Fan Module
A4 Motherboard
A5 Infrastructure Board
A6 CPU Carrier
A7 CPU
A8 Solid State Drive
A9 PCA, External PCIe I/O
A10 Midplane
A11 Reference Module
A12 DAC board
A13 Module, LVDS I/O Interface
A13 Module, BCD I/O Interface
A14 Lowband/Highband Switch
A15 RF Deck Interface
A16 Frequency Multiplier
A17 Agile Mod/Filter
A18 LB Output Module
A19 40 GHz Doubler (540/54E)
RF Output Connector
Performance Tests
Self Tests
N/A
Maximum Output Power N/A
Power Level Accuracy (Option AT1/AT2) N/A
Non-Harmonic Spurious
N/A
Harmonic and Sub-Harmonic Spurious N/A
Pulse Modulation On/Off Ratio (Option PM1/PM2) N/A
Internal FM Deviation Accuracy (Option UNT/UT1) N/A
Internal FM Distortion (Option UNT/UT1) N/A
Internal Phase Modulation Deviation Accuracy
(Option UNT)
N/A
X
Internal Phase Modulation Distortion
(Option UNT/UT1)
N/A
X
External FM Deviation Accuracy (Option UNT/UT1) N/A
External Phase Modulation Deviation Accuracy
(Option UNT/UT1)
N/A
X
X
Internal Pulse Modulation Rise/Fall Time
(Option PM1/PM2)
N/A
X
X
X X
Frequency Switching Speed N/A
Single Sideband Phase Noise N/A
1. Performance tests are listed in the order that they should be performed to minimize changes in test equipment configurations.