Features and Functions 3
Keysight 34420A User’s Guide 127
– Non-volatile memory settings can be returned to their factory defaults.
Front Panel operation: return the settings to factory defaults under the
11: PRESET command in the SYStem menu.
Remote operation: use the SYStem:PRESet command to return the meter to
the factory defaults.
Non-volatile memory settings and their factory defaults:
Setting Factory Defaul t
Digital Filter
[a]
Digital Filter Precharge
Low Power W
Low Volt W
LoV Limit W
Probe Type
RTD Type
RTD R
0
Temperature Units
Chart Out
Chart Span
Chart Offset
Comma
[a] The digital filter is ON following a Front Panel PRESET.
The digital filter is OFF following a Remote Interface PRESET.
MEDium 50 rdgs
On
Off
Off
20 mV
RTD
a = .00385
100 W
°C
Off
1 mV
0.00 V
On
To Next Page
Loading...
