Keysight 34420A - SCPI Compliance Information

4 Remote Interface Reference
216 Keysight 34420A User’s Guide
SCPI Compliance Information
The following commands are device-specific to the 34420A. They are not included
in the 1994.0 version of the SCPI standard. However, these commands are
designed with the SCPI format in mind and they follow all of the syntax rules of
the standard.
Many of the required SCPI commands are accepted by the meter but are not
described in this manual for simplicity or clarity. Most of these non-documented
commands duplicate the functionality of a command already described in this
chapter
CALibration
:COUNt?
:OUTPut { ZERO | GAIN }
:OUTPut?
:SECure:CODE <code string>
:SECure:STATe { OFF | ON | 0 | 1 } [,<code>]
:SECure:STATe? returns 0 or 1
:STRing <string>
:STRing?
CALCulate
:FUNCtion { SCALe | AVERage }
:FUNCtion?
:AVERage:MINimum?
:AVERage:MAXimum?
:AVERage:AVERage?
:AVERage:SDEViation?
:AVERage:PTPeak?
:AVERage:COUNt?
:SCALe:GAIN
:SCALe:GAIN?
:SCALe:OFFSet
:SCALe:OFFSet?
INPut
:FILTer[:LPASS]:DIGital:PREcharge {ON | OFF}
:FILTer[:LPASS]:DIGital:PREcharge?
:FILTer[:LPASs]:DIGital:RESPonse { SLOW | MEDium | FAST }
:FILTer[:LPASs]:DIGital:RESPonse?
:FILTer[:LPASs]:TYPE { ANAlog | DIGital | BOTH }
:FILTer[:LPASs]:TYPE?