2 Front-Panel Operation
62 Keysight 34420A User’s Guide
To Use Reading Memory
The meter can store up to 1024 readings in internal memory. The following steps
demonstrate how to store readings and retrieve them.
1 Select the function.
Select any measurement function. You can change the function at any time
during reading memory.
2 Select the single trigger mode.
Notice that the Trig annunciator turns on. When reading memory is enabled,
readings are stored when you trigger the meter.
For this example, single triggering is used to store readings. You can also use
auto triggering or reading hold.
3 Turn on the menu.
4 Move across to the SYS MENU choice on this level.
5 Move down to a level to the RDGS STORE command.
To Next Page
Loading...
