Remote Interface Reference 4
Keysight 34420A User’s Guide 209
To Set the Baud Rate
You can select one of six baud rates for RS-232 operation. The rate is set to 9600
baud when the meter is shipped from the factory. See also “Baud Rate Selection
(RS-232)” on page 117.
1 Turn on the front-panel menu.
2 Move across to the I/O MENU choice on this level.
3 Move down a level and then across to the BAUD RATE command.
4 Move down to the “parameter” level to select the baud rate.
Use the left/right arrow keys to see the baud rate choices. Choose from one of
the following: 300, 600, 1200, 2400, 4800, or 9600 baud.
To Next Page
Loading...
