4 Remote Interface Reference
132 Keysight 34420A User’s Guide
– “To Set the Baud Rate” on page 209
– “To Set the Parity” on page 211
– “To Select the Programming Language” on page 213
– “To Select the Programming Language” on page 213
– “Alternate Programming Language Compatibility” on page 215
– “SCPI Compliance Information” on page 216
– “IEEE-488 Compliance Information” on page 219
If you are a first-time user of the SCPI language, refer to these sections to become
familiar with the language before attempting to program the meter.
To Next Page
Loading...
