Keysight 34420A - Page 163

Remote Interface Reference 4
Keysight 34420A User’s Guide 159
[SENSe:]TEMPerature:TRANsducer:FRTD:TYPE {85 | 91}
This command sets the four-wire RTD type. The alpha is entered as either 85 (for a
= .000385) or 91 (for a = .000391).
[SENSe:]TEMPerature:TRANsducer:FRTD:TYPE?
This command queries for the type of RTD being used. Returns either +91 or +85.
[SENSe:]TEMPerature:TRANsducer:FRTD:RESistance[:REFerence] <value>
This command sets the four-wire RTD R
0
value. The value is in the range of 4.9 W
to 2.1 kW.
[SENSe:]TEMPerature:TRANsducer:FRTD:RESistance[:REFerence]?
This command queries for the RTD R
0
value being used.
UNIT:TEMPerature {C | CEL | F | FAR | K}
This command sets the measurement and reporting units for temperature
measurements.
UNIT:TEMPerature?
This command queries the temperature measurement reporting units.