Remote Interface Reference 4
Keysight 34420A User’s Guide 193
Refer to the cable and adapter diagrams below to connect the meter to most
computers or terminals. If you configuration is different than those described,
order the 34399A Adapter Kit. This kit contains adapters for connection to other
computers, terminals, and modems. Instructions and pin diagrams are included
with the adapter kit.
DB-9 Serial Connection If your computer or terminal has a 9-pin serial port
with a male connector, use the null-modem cable included with the 34398A
Cable Kit. This cable has a 9-pin female connector on each end. The cable pin
diagram is shownbelow.
DB-25 Serial Connection If your computer or terminal has a 25-pin serial port
with a male connector, use the null-modem cable and 25-pin adapter included
with the 34398A Cable Kit. The cable pin diagram is shown below.
To Next Page
Loading...
