5 Error Messages
224 Keysight 34420A User’s Guide
-112 Program mnemonic too long
A command header was received which contained more than the
maximum 11 characters allowed. Example:
CONFIGURATION:VOLT:DC
-113 Undefined header
A command was received that is not valid for this meter. You
may have misspelled the command or it may not be a valid
command. If you are using the short form of the command,
remember that it may contain up to four letters. Example:
TRIGG:COUN 3
-121 Invalid character in number
An invalid character was found in the number specified for a
parameter value. Example:
STAT:QUES:ENAB #B01010102
-123 Numeric overflow
A numeric parameter was found whose exponent was larger
than 32,000. Example:
TRIG:COUN 1E34000
-124 Too many digits
A numeric parameter was found whose mantissa contained more
than 255 digits, excluding leading zeros.
-128 Numeric data not allowed
A numeric parameter was found when a string or discrete
parameter was expected.
-131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter. You
may have misspelled the suffix. Example:
TRIG:DEL 0.5 SECS
-134 Suffix too long
A suffix for a numeric parameter contained too many characters.
-138 Suffix not allowed
A suffix was received following a numeric parameter which does
not accept a suffix. Example:
SAMP:COUN 1 SEC (SEC is not a valid
suffix).
To Next Page
Loading...
