2 Front-Panel Operation
46 Keysight 34420A User’s Guide
3 Move down to the commands level within the SYS MENU.
The RDGS STORE command is your first choice on this level.
4 Move across to the COMMA command on the commands level.
There are eleven command choices available in the SYS MENU. Each choice on
this level has a number prefix for easy identification (1: , 2: , etc.).
5 Move down a level to the COMMA parameter choices.
The first parameter choice is ON for the COMMA command (the comma
setting is stored in non-volatile memory and ON is the factory setting).
6 Move across to the OFF choice.
There are two parameter choices for COMMA.
To Next Page
Loading...
